Deliver coordinates in the system
your project requires

Your GNSS solution is only useful if it can be delivered in the coordinate system and height reference required by the project.

From GNSS coordinates to project coordinates - Your UAV GNSS observations are processed in the WGS84 global reference framework, but that's rarely where the mapping workflow ends. Clients, surveyors and authorities may require a national or regional grid, a specific vertical datum, or an established local site coordinate system.

KlauPPK lets you transform your processed camera positions into the required project framework before they move into photogrammetry or your final mapping deliverables.

Coordinate systems built into the workflow -‍ ‍KlauPPK supports more than 1,400 coordinate systems, including global, national and state/regional systems. Select the required system and KlauPPK applies it to your processed camera positions.

• Global systems

• National datums

• State and regional grids

• Geographic and projected coordinates

Get the height right too - Horizontal coordinates are only part of the answer.

GNSS naturally produces ellipsoidal heights, while many mapping and survey projects require orthometric heights referenced to a geoid.

KlauPPK supports more than 20 geoids, allowing camera positions to be prepared using the height reference required by the project.

Work in local site coordinates - Mining, construction and infrastructure projects often operate in their own local coordinate system.

KlauPPK allows a site localisation to be created from verified control, with transformation residuals available for review before the local system is saved and applied to the project.

Transform your data at the start of the workflow

Process the GNSS data, apply the required coordinate system and height reference, and export the camera positions ready for the next stage of your mapping workflow.